TX MCS-TD021 Portable Solar Generator for Camping
Product parameters
| Model | MCS-TD021 |
| Solar Panel | |
| Solar panel with cable wire | 150W/18V |
| Main Power Box | |
| Built in controller | 20A/12V PWM |
| Built in battery | 12.8V/50AH(640WH) |
| DC output | DC12V * 5pcs USB5V * 20pcs |
| LCD display | Battery voltage, temperature and the battery capacity percent |
| Accessories | |
| LED bulb with cable wire | 2pcs*3W LED bulb with 5m cable wires |
| 1 to 4 USB charger cable | 20 piece |
| * Optional accessories | AC wall charger, fan, TV , tube |
| Features | |
| System protection | Low voltage, overload ,load short circuit protection |
| Charging mode | Solar panel charging/AC charging(optional) |
| Charging time | Around 4-5 hours by solar panel |
| Package | |
| Solar panel size/weight | 1480*665*30mm/12kg |
| Main power box size/weight | 370*220*250mm/9.5kg |
| Energy Supply Reference Sheet | |
| Appliance | Working time/hrs |
| LED bulbs(3W)*2pcs | 107 |
| DC fan(10W)*1pcs | 64 |
| DC TV(20W)*1pcs | 32 |
| Mobile phone charging | 32pcs phone charging full |
Features
1. The kits is a DC Output system, with 20pcs USB output for phone charging
2. Ultra-low power standby consumption, in case of the system switch is turned off, the device would be in very low power consumption state;
3. USB output is charging for mobile phones, LED bulb lighting , mini fan ...reference as 5V/2A;
4. DC5V output max current advised below than 40A.
5. Can be as charging use solar panel and AC wall charger.
6. The led indicator battery voltage , temperature and the battery capacity percent.
7. PWM controller built inside of the power box, over charging, and low battery protections for lithium battery.
8. When charging from solar panel or mains charger, to be faster charging battery full, advised to disconnect the loads or switch off the system On/Off switch, but can be as charging as discharging.
9. The device with all automatically electronic protections of over charging/discharging. after full charged/discharged, will be auto stop charging/discharging to protect the device for long life span.
Precautions
1. Please read this manual book carefully before using the product;
2. Don’t use parts or appliances that don’t meet the product specification
3. To avoid your product damage, non-professional person are not allowed to open the device to repair;
4. The storage box should be waterproof and moisture-proof and must be placed in a dry and ventilated place;
5. When using the solar lighting kits, don’t near the fire or in high temperature conditions;
6. Before using in the first time, please fully charge the inside battery before use, no need to worry about over charging because of the electronics protections;
7. Please save your device electricity in rainy days, and turn off the system on/off switch when not use it.
